Assessment of leakage management in small water supplies using performance indicators.

The revision of the Drinking Water Directive (DWD), which the process of consultation by the European Parliament is coming to the end, includes a commitment for all Member States to assess the level of water leakage. The overarching aim of this action is to reduce water loss through leaks. In regard to this, use of performance indicators as suitable to enable assessment of water utility performance with regard to leakage reduction, including impacts on environment and cost-efficiency, is recommended. The paper provides results from water losses evaluation with the set of performance indicators (PI), considering dependence on the availability of resources and specific operating conditions. An analysis of different PI that are necessary to evaluate in most of leakage reduction methods was conducted considering step-by-step approach. Furthermore, the most relevant data for leakage analysis and management on a network level was determined. Presented PI can be used to improve leakage management of small water supply system. Similarly as in the Deming cycle, the described tool provides for planning activities, executing activities in accordance with the plan, checking the degree of execution of objectives included in the plan, and on the basis of conducted analyses and lessons learned, the so-called improvement. The results of the analysis lead to the conclusion that through a comprehensive, systematically improved strategy, the high effectiveness of the system could be reach. The reliable monitoring does not have to be based on advanced technological methods, which are often unavailable for small water supply system, due to high investment and operating costs. The results indicate that integrated IT systems, as SCADA, might not be directly beneficial to water loss management in small networks with moderate leakage levels.

Innovative membrane photobioreactor for sustainable CO2 capture and utilization.

The rising of greenhouse-gas emissions (GHG), during the last 200 years, is associated to the well known global warming phenomena. One of the main sources of CO2-equivalent GHGs emissions are the environmental protection plants accounting for 1.57% of the global emissions and thus sustainable and effective technologies for their mitigation are strongly needed. The current paper presents and discusses the assessment of an innovative membrane photo-bioreactor (MPBR) whose aim was the promotion of CO2 capture from conveyed flows, such as those from wastewater treatment plants (WWTPs), landfill and composting plants, for production and energy valorisation of algal biomass. Chlorella vulgaris microalgae strain was selected as photosynthetic platform for the abovementioned purposes. The influence of various operating parameters has been explored, including the photosynthetic photon flux densities (PPFD) (60 and 120 µmol m-2 s-1), liquid/gas ratio (L/G = 5, 10 or 15) and CO2 concentration (5, 10 and 15%) in order to investigated their effects on carbon capture effectiveness and biomass production. The results demonstrated that the increasing of PPFD significantly enhanced the biomass production in terms of biomass productivity (P) and total dry weight (DW). The highest biomass concentration of 1.01 g L-1 was achieved at PPFD of 120 µmol m-2 s-1 with a L/G of 15. Under the aforementioned conditions, carbon dioxide removal efficiency (RE) reached values up to 80%. In addition, the novel MPBR equipped with an innovative self-forming dynamic membrane (SFDM) showed a simultaneous biomass harvesting rate of 41 g m-2 h-1.

Sustainable management of biological solids in small treatment plants: overview of strategies and reuse options for a solar drying facility in Poland.

The issue of sustainable management of biosolids (excess sludge) from wastewater treatment is an important issue in the entire developed world. Residual sludge disposal costs and environmental impact may be significant, and reducing such costs, as well as the energy consumption for dewatering and drying, is a key issue for safe and sustainable sludge disposal, considering the recent ban of some disposal options, such as landfilling, in many European countries. An alternative to thermal technologies is solar drying (not to be confused with bio-drying, very close to the concept of composting). Solar greenhouse drying technology is characterized by reduced land requirements compared with traditional outdoor drying beds, as well as by low-energy requirements compared with other thermal drying methods. Process operation is cost-efficient, with close to no maintenance, and observed specific evaporation rates up to threefold higher than conventional drying beds. Many applications of this technology exist in Poland, Germany and Austria: more than 10,000 t of wet sludge per year is treated in this way in Germany alone and almost as many (9000 t/year) in Poland. This paper examines current biosolids treatment technologies applicable to small wastewater treatment plants (2000-9999 population equivalents served) and opportunities for possible solids reuse in Poland in view of sustainable circular economy schemes. In particular, a purely solar-driven greenhouse facility for sewage sludge drying was investigated under different conditions (season, temperature, environmental humidity) and possible improvements for its efficiency evaluated. Sludge processed by solar drying could have different final disposal pathways, according to season, in accordance with the prescriptions of the new National Waste Management Plan of Poland.

Cost-effective removal of COD in the pre-treatment of wastewater from the paper industry.

The present paper reveals results of research for cost-effective removal of chemical oxygen demand (COD) contained in industrial paper mill effluent. Not only process efficiency but also wastewater treatment costs are discussed. Different pre-treatment processes are applied aiming to investigate the COD removal before discharge to the municipal sewage network. The objective of this paper is to find the optimal operating conditions for the coagulation process. The effects of key operational parameters, including the type of coagulant, initial pH, temperature and coagulant dose, on COD percentage removal were investigated. The laboratory experiments confirmed the high efficiency of chemically enhanced mechanical treatment towards COD. The data obtained show that even low dose of chemicals provides sufficient COD reduction. The initial pH of the wastewater had a significant impact on the COD removal. Under the optimal operational conditions (pH = 7.5, T = 18 °C) the treatment of wastewater from paper industries by coagulation has led to a reduction of 70% COD for wastewater discharged. In terms of the investigated paper industry wastewater, polyaluminium chloride appears to be most suitable for treatment of high COD concentration. However, in an economic evaluation of requirements for wastewater treatment, operating costs and associated saving were such that PAX was more favourable.

Water quality and resource management in the dairy industry.

Food industry is one of the most important and fastest growing sectors of economy in Poland. This sector is also characterized by high demand for the resources, particularly for water. Polish food industrial plants consumed 793 hm3 of water in 2014. Dairy branch had a combined 35% share of the above consumption. As shown by the data obtained from the Polish Central Statistical Office, the majority of dairy plants use its own source of water, so this branch is also important water producer in Poland. Water used for dairy industry should meet the requirements of at least drinking water quality, so the factories need to treat the water. This paper analyses the correlations between selected technical process, equipment profiles and water quality, and consumption in two types of dairy factories (DF). The first one DF-1 processes approx. 50,000 L of milk, and the second, DF-2 processes approx. 330,000 L of milk per day. The water taken from the wells needs to be pre-treated because of iron and manganese concentration and due to specific requirements in various industrial processes. As a result of this work, we have managed to propose technological solutions in the context of water consumption rationalization. The proposed solutions aim at improving water and wastewater management by reducing the amount of consumed water by industry.